Directions:
• A coat of Clear Glaze Medium is recommended as a barrier coat prior to varnishing depending on climate and humidity.

• Use Varnish full strength. If thinning is necessary, add drops of Flow Medium or Retarder. Do not over dilute.

• Apply thin layers in a criss-cross motion using a soft but firm bristle brush suitable to surface size.

• Smooth coat with by brushing final in the direction of the wood grain.

• Allow to air dry a minimum of an hour before applying additional coats.  Drying time varies depending on climate and humidity.

• Apply three coats before sanding. Sand lightly if 24 hours have lapsed between coats to ensure proper adhesion.

• For alcohol resistant finish or for outdoor use, apply a minimum of 4 to 5 coats of varnish. Allow to cure a minimum of 2 weeks before use.

• If using a hair dryer for surface drying, hold away from the surface and avoid excessive heat which could cause cracking.

Clean up with mild soap and water.

Note: Not recommended for use over oil based paint or oil based antiquing finishes.